9/12/15 |
Steel Erection & Rigging Fundamentals
Saturday, September 12, 2015
Steel Erection & Rigging Fundamentals
Local 26, Savannah, GA
Steel Erection & Rigging Fundamentals covers a general overview of OSHA Subpart R including fall hazard training, multiple lift rigging procedures, connector procedures and rigging fundamentals.
directions
912-964-2586
|
Local 26 |
Savannah, GA |
9/13/15 |
Scaffold User
Sunday, September 13, 2015
Scaffold User
Local 26, Savannah, GA
The Scaffold User course covers a general overview of OSHA Subpart L including scope, application, definitions, general requirements and training requirements. It also reviews additional requirements for tubular welded frames, mobile tower systems, tube and coupler, suspended and tank builder’s scaffolds.
directions
912-964-2586
|
Local 26 |
Savannah, GA |
9/13/15 |
Supplementary Rigging Training – Module 2
Sunday, September 13, 2015
Supplementary Rigging Training – Module 2
Local 13, Newportville, PA
Powerhouse Rigging
This module addresses a number of rigging topics including rigging without a crane, alternative hoisting equipment, tugger hoisting techniques, anchorage/attachment, high lines, and block and tackle systems. Additionally, you will be instructed on the basic scientific rigging terminology, fleet angle, mechanical advantage, transfer of loads, planning steps, related calculations, structural nomenclature and safety regulations.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/13/15 |
Supplementary Rigging Training – Module 1
Sunday, September 13, 2015
Supplementary Rigging Training – Module 1
Local 13, Newportville, PA
Rigging Inspection and Use
This module will explain the responsibilities of a rigger and help the student to become familiar with various rigging components. Students learn the inspection criteria for rigging components, where the first signs of wear and defects occur, and how to prevent damage to rigging components. Additionally, you’ll learn how to interpret rigging capacity charts and tables related to rigging tools. Trainers discuss safety regulations, uses and applications of rigging components.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/14/15 |
OSHA 30 Hour Completion
Monday, September 14, 2015
OSHA 30 Hour Completion
Local 26, Savannah, GA
OSHA 30 Hour Completion teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course continues to familiarize job applicants with OSHA standard requirements and explain Employee/Employer Rights and Responsibilities. NOTE: For members interested in any OSHA 30 Hour Class – the SAME trainer must do ALL the training and ALL the training must be completed, start to finish, within six (6) months.
Also, MOST is pleased to announce online safety training is now available for OSHA 30 Hour and is provided by Click Safety. Please contact Nikki Benson at 913-281-5036 ext. 317 for enrollment.
directions
912-964-2586
|
Local 26 |
Savannah, GA |
9/15/15 |
Construction Safety & Health 10 Hour
Tuesday, September 15, 2015
Construction Safety & Health 10 Hour
Local 627, Phoenix, AZ
Construction Safety & Health OSHA 10-Hour teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course also familiarizes job applicants with OSHA standard requirements and explains Employee/ Employer Rights and Responsibilities.
We are pleased to announce that online safety training for the OSHA 10 Hour is now available and is provided by Red Vector. Please contact Nikki Benson at 913-281-5036 ext. 317 for information and to enroll.
http://www.boilermakers627.com/ directions
602-495-1282
|
Local 627 |
Phoenix, AZ |
9/16/15 |
Steel Erection & Rigging Fundamentals
Wednesday, September 16, 2015
Steel Erection & Rigging Fundamentals
Local 627, Phoenix, AZ
Steel Erection & Rigging Fundamentals covers a general overview of OSHA Subpart R including fall hazard training, multiple lift rigging procedures, connector procedures and rigging fundamentals.
http://www.boilermakers627.com/ directions
602-495-1282
|
Local 627 |
Phoenix, AZ |
9/17/15 |
Scaffold User
Thursday, September 17, 2015
Scaffold User
Local 627, Phoenix, AZ
The Scaffold User course covers a general overview of OSHA Subpart L including scope, application, definitions, general requirements and training requirements. It also reviews additional requirements for tubular welded frames, mobile tower systems, tube and coupler, suspended and tank builder’s scaffolds.
http://www.boilermakers627.com/ directions
602-495-1282
|
Local 627 |
Phoenix, AZ |
9/18/15 |
OSHA 30 Hour Completion
Friday, September 18, 2015
OSHA 30 Hour Completion
Local 627, Phoenix, AZ
OSHA 30 Hour Completion teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course continues to familiarize job applicants with OSHA standard requirements and explain Employee/Employer Rights and Responsibilities. NOTE: For members interested in any OSHA 30 Hour Class – the SAME trainer must do ALL the training and ALL the training must be completed, start to finish, within six (6) months.
Also, MOST is pleased to announce online safety training is now available for OSHA 30 Hour and is provided by Click Safety. Please contact Nikki Benson at 913-281-5036 ext. 317 for enrollment.
http://www.boilermakers627.com/ directions
602-495-1282
|
Local 627 |
Phoenix, AZ |
9/18/15 |
Supplementary Rigging Training – Module 2
Friday, September 18, 2015
Supplementary Rigging Training – Module 2
Local 456, Rock Hills, SC
Powerhouse Rigging
This module addresses a number of rigging topics including rigging without a crane, alternative hoisting equipment, tugger hoisting techniques, anchorage/attachment, high lines, and block and tackle systems. Additionally, you will be instructed on the basic scientific rigging terminology, fleet angle, mechanical advantage, transfer of loads, planning steps, related calculations, structural nomenclature and safety regulations.
directions
803-980-5522
|
Local 456 |
Rock Hills, SC |
9/18/15 |
Supplementary Rigging Training – Module 1
Friday, September 18, 2015
Supplementary Rigging Training – Module 1
Local 456, Rock Hills, SC
Rigging Inspection and Use
This module will explain the responsibilities of a rigger and help the student to become familiar with various rigging components. Students learn the inspection criteria for rigging components, where the first signs of wear and defects occur, and how to prevent damage to rigging components. Additionally, you’ll learn how to interpret rigging capacity charts and tables related to rigging tools. Trainers discuss safety regulations, uses and applications of rigging components.
directions
803-980-5522
|
Local 456 |
Rock Hills, SC |
9/19/15 |
Supplementary Rigging Training – Module 3
Saturday, September 19, 2015
Supplementary Rigging Training – Module 3
Local 456, Rock Hills, SC
Crane Rigging
Module 3 focuses on the crane – understanding crane nomenclature, the different types and lifting systems, proper boom assembly/disassembly, safety regulations and how to spot and set up a crane. The class also covers how to read capacity charts, signaling, utilizing suspended personnel platforms, good safety and skills practice, accidents and preventative solutions. Discussions about OSHA regulations, Subpart CC-signal person qualification and the review of comprehensive rigging plans will be covered.
directions
803-980-5522
|
Local 456 |
Rock Hills, SC |
9/20/15 |
Supplementary Rigging Training – Module 4
Sunday, September 20, 2015
Supplementary Rigging Training – Module 4
Local 456, Rock Hills, SC
Rigging Drawings, Calculations and Set Up
The final supplementary rigging training module provides instruction on rigging drawing and interpretation, calculating equalization and load distribution. It illustrates how to determine a loads center of gravity and calculate its weights. Additionally you will learn how to use reference materials, understand the logistics and structuring of a material lay down area, set up a fabrication area and maintain it, and inspect/document/track materials.
directions
803-980-5522
|
Local 456 |
Rock Hills, SC |
9/20/15 |
Supplementary Rigging Training – Module 3
Sunday, September 20, 2015
Supplementary Rigging Training – Module 3
Local 13, Newportville, PA
Crane Rigging
Module 3 focuses on the crane – understanding crane nomenclature, the different types and lifting systems, proper boom assembly/disassembly, safety regulations and how to spot and set up a crane. The class also covers how to read capacity charts, signaling, utilizing suspended personnel platforms, good safety and skills practice, accidents and preventative solutions. Discussions about OSHA regulations, Subpart CC-signal person qualification and the review of comprehensive rigging plans will be covered.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/21/15 |
Construction Safety & Health 10 Hour
Monday, September 21, 2015
Construction Safety & Health 10 Hour
Local 502, Puyallup, WA
Construction Safety & Health OSHA 10-Hour teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course also familiarizes job applicants with OSHA standard requirements and explains Employee/ Employer Rights and Responsibilities.
We are pleased to announce that online safety training for the OSHA 10 Hour is now available and is provided by Red Vector. Please contact Nikki Benson at 913-281-5036 ext. 317 for information and to enroll.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/22/15 |
Steel Erection & Rigging Fundamentals
Tuesday, September 22, 2015
Steel Erection & Rigging Fundamentals
Local 502, Puyallup, WA
Steel Erection & Rigging Fundamentals covers a general overview of OSHA Subpart R including fall hazard training, multiple lift rigging procedures, connector procedures and rigging fundamentals.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/22/15 |
Construction Safety & Health 10 Hour
Tuesday, September 22, 2015
Construction Safety & Health 10 Hour
Local 13, Newportville, PA
Construction Safety & Health OSHA 10-Hour teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course also familiarizes job applicants with OSHA standard requirements and explains Employee/ Employer Rights and Responsibilities.
We are pleased to announce that online safety training for the OSHA 10 Hour is now available and is provided by Red Vector. Please contact Nikki Benson at 913-281-5036 ext. 317 for information and to enroll.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/22/15 |
Construction Safety & Health 10 Hour
Tuesday, September 22, 2015
Construction Safety & Health 10 Hour
Local 37, Slidell, LA
Construction Safety & Health OSHA 10-Hour teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course also familiarizes job applicants with OSHA standard requirements and explains Employee/ Employer Rights and Responsibilities.
We are pleased to announce that online safety training for the OSHA 10 Hour is now available and is provided by Red Vector. Please contact Nikki Benson at 913-281-5036 ext. 317 for information and to enroll.
directions
985-847-9660
|
Local 37 |
Slidell, LA |
9/23/15 |
Scaffold User
Wednesday, September 23, 2015
Scaffold User
Local 502, Puyallup, WA
The Scaffold User course covers a general overview of OSHA Subpart L including scope, application, definitions, general requirements and training requirements. It also reviews additional requirements for tubular welded frames, mobile tower systems, tube and coupler, suspended and tank builder’s scaffolds.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/23/15 |
Steel Erection & Rigging Fundamentals
Wednesday, September 23, 2015
Steel Erection & Rigging Fundamentals
Local 37, Slidell, LA
Steel Erection & Rigging Fundamentals covers a general overview of OSHA Subpart R including fall hazard training, multiple lift rigging procedures, connector procedures and rigging fundamentals.
directions
985-847-9660
|
Local 37 |
Slidell, LA |
9/23/15 |
Steel Erection & Rigging Fundamentals
Wednesday, September 23, 2015
Steel Erection & Rigging Fundamentals
Local 13, Newportville, PA
Steel Erection & Rigging Fundamentals covers a general overview of OSHA Subpart R including fall hazard training, multiple lift rigging procedures, connector procedures and rigging fundamentals.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/24/15 |
OSHA 30 Hour Completion
Thursday, September 24, 2015
OSHA 30 Hour Completion
Local 502, Puyallup, WA
OSHA 30 Hour Completion teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course continues to familiarize job applicants with OSHA standard requirements and explain Employee/Employer Rights and Responsibilities. NOTE: For members interested in any OSHA 30 Hour Class – the SAME trainer must do ALL the training and ALL the training must be completed, start to finish, within six (6) months.
Also, MOST is pleased to announce online safety training is now available for OSHA 30 Hour and is provided by Click Safety. Please contact Nikki Benson at 913-281-5036 ext. 317 for enrollment.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/24/15 |
Scaffold User
Thursday, September 24, 2015
Scaffold User
Local 37, Slidell, LA
The Scaffold User course covers a general overview of OSHA Subpart L including scope, application, definitions, general requirements and training requirements. It also reviews additional requirements for tubular welded frames, mobile tower systems, tube and coupler, suspended and tank builder’s scaffolds.
directions
985-847-9660
|
Local 37 |
Slidell, LA |
9/24/15 |
Scaffold User
Thursday, September 24, 2015
Scaffold User
Local 13, Newportville, PA
The Scaffold User course covers a general overview of OSHA Subpart L including scope, application, definitions, general requirements and training requirements. It also reviews additional requirements for tubular welded frames, mobile tower systems, tube and coupler, suspended and tank builder’s scaffolds.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/25/15 |
OSHA 30 Hour Completion
Friday, September 25, 2015
OSHA 30 Hour Completion
Local 37, Slidell, LA
OSHA 30 Hour Completion teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course continues to familiarize job applicants with OSHA standard requirements and explain Employee/Employer Rights and Responsibilities. NOTE: For members interested in any OSHA 30 Hour Class – the SAME trainer must do ALL the training and ALL the training must be completed, start to finish, within six (6) months.
Also, MOST is pleased to announce online safety training is now available for OSHA 30 Hour and is provided by Click Safety. Please contact Nikki Benson at 913-281-5036 ext. 317 for enrollment.
directions
985-847-9660
|
Local 37 |
Slidell, LA |
9/25/15 |
OSHA 30 Hour Completion
Friday, September 25, 2015
OSHA 30 Hour Completion
Local 13, Newportville, PA
OSHA 30 Hour Completion teaches job applicants to identify hazards in the workplace and how to protect themselves from those hazards. This course continues to familiarize job applicants with OSHA standard requirements and explain Employee/Employer Rights and Responsibilities. NOTE: For members interested in any OSHA 30 Hour Class – the SAME trainer must do ALL the training and ALL the training must be completed, start to finish, within six (6) months.
Also, MOST is pleased to announce online safety training is now available for OSHA 30 Hour and is provided by Click Safety. Please contact Nikki Benson at 913-281-5036 ext. 317 for enrollment.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/27/15 |
Supplementary Rigging Training – Module 4
Sunday, September 27, 2015
Supplementary Rigging Training – Module 4
Local 13, Newportville, PA
Rigging Drawings, Calculations and Set Up
The final supplementary rigging training module provides instruction on rigging drawing and interpretation, calculating equalization and load distribution. It illustrates how to determine a loads center of gravity and calculate its weights. Additionally you will learn how to use reference materials, understand the logistics and structuring of a material lay down area, set up a fabrication area and maintain it, and inspect/document/track materials.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |
9/28/15 |
Supplementary Rigging Training – Module 2
Monday, September 28, 2015
Supplementary Rigging Training – Module 2
Local 502, Puyallup, WA
Powerhouse Rigging
This module addresses a number of rigging topics including rigging without a crane, alternative hoisting equipment, tugger hoisting techniques, anchorage/attachment, high lines, and block and tackle systems. Additionally, you will be instructed on the basic scientific rigging terminology, fleet angle, mechanical advantage, transfer of loads, planning steps, related calculations, structural nomenclature and safety regulations.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/28/15 |
Supplementary Rigging Training – Module 1
Monday, September 28, 2015
Supplementary Rigging Training – Module 1
Local 502, Puyallup, WA
Rigging Inspection and Use
This module will explain the responsibilities of a rigger and help the student to become familiar with various rigging components. Students learn the inspection criteria for rigging components, where the first signs of wear and defects occur, and how to prevent damage to rigging components. Additionally, you’ll learn how to interpret rigging capacity charts and tables related to rigging tools. Trainers discuss safety regulations, uses and applications of rigging components.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/29/15 |
Supplementary Rigging Training – Module 3
Tuesday, September 29, 2015
Supplementary Rigging Training – Module 3
Local 502, Puyallup, WA
Crane Rigging
Module 3 focuses on the crane – understanding crane nomenclature, the different types and lifting systems, proper boom assembly/disassembly, safety regulations and how to spot and set up a crane. The class also covers how to read capacity charts, signaling, utilizing suspended personnel platforms, good safety and skills practice, accidents and preventative solutions. Discussions about OSHA regulations, Subpart CC-signal person qualification and the review of comprehensive rigging plans will be covered.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/30/15 |
Supplementary Rigging Training – Module 4
Wednesday, September 30, 2015
Supplementary Rigging Training – Module 4
Local 502, Puyallup, WA
Rigging Drawings, Calculations and Set Up
The final supplementary rigging training module provides instruction on rigging drawing and interpretation, calculating equalization and load distribution. It illustrates how to determine a loads center of gravity and calculate its weights. Additionally you will learn how to use reference materials, understand the logistics and structuring of a material lay down area, set up a fabrication area and maintain it, and inspect/document/track materials.
http://www.boilermakers502.org/ directions
253-435-0330
|
Local 502 |
Puyallup, WA |
9/30/15 |
MOST 5 Hour Refresher
Wednesday, September 30, 2015
MOST 5 Hour Refresher
Local 13, Newportville, PA
MOST offers a 5 Hour Refresher that touches on the following topics: introduction to OSHA, personal protection and training, confined space, fall protection – OSHA Subpart M, scaffolding – OSHA Subpart L, electrical safety – OSHA Subpart K and occupational health and hazard communication – OSHA Subpart D. While this course that is not recognized by OSHA, it is recognized by some Contractors and Owners, and can be a jobsite requirement. The training is noted on the MOST Boilermaker Delivery System and works in conjunction with the Uniform Referral Standards and Joint Referral Rules.
http://boilermakers13.org/ directions
215-785-5536
|
Local 13 |
Newportville, PA |